 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Ready to run PicoMiteVGA for GBP25 - good price?
  Page 7 of 7 |
|||||
| Author | Message | ||||
| Calli Regular Member  Joined: 20/10/2021 Location: GermanyPosts: 74 |
Sorry. All gone. Carsten |
||||
atmega8 Guru  Joined: 19/11/2013 Location: GermanyPosts: 722 |
What did you pay for it? |
||||
| Calli Regular Member Joined: 20/10/2021 Location: GermanyPosts: 74 |
About 25 euros per board (5 boards). (Including shipping DHL Express and customs) |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6798 |
IIRC the minimum order, if you want them assembled, is 5 blank boards plus the assembly cost for two of them. So you get two pre-built units and three blank boards. As the boards themselves are so cheap that doesn't matter if you only want a couple of units. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| atmega8 Guru Joined: 19/11/2013 Location: GermanyPosts: 722 |
If i understand it right, i have to pay 125€? That is far tooo much if need only 1 Board. Thx |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6798 |
I've not investigated the prices myself, but that sounds high to me. Did you specify 2 boards? (I suspect you get the 3 blanks automatically as five blanks is the minimum that they'll make). Also, you can leave off any bits you don't need by deleting them from the parts file. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 3802 |
That's for 5 built ("assembled") ones. John |
||||
| okwatts Regular Member Joined: 27/09/2022 Location: CanadaPosts: 59 |
As an update I assembled the 5 (version 1.0a) I received earlier and added the DS3231 ( a little fiddly needing some liquid flux) and they all are working satisfactorily. As I mentioned the total with the separate clock chips was $140 USD for 5, adding in the extra shipping fee from UPS ($32CDN=$24 USD) my total is $164 or $32.80 USD per unit. I had previously built one using a pico and the Land Boards VGA-01 ($17USD + shipping) so the price is comparable having sourced the extra parts myself (In fact possibly more, I haven't done a detailed costing). I know that Canada Post has high shipping costs so can't put a number on what that would be yet but I have 2 or 3 assembled that I could sell. The shipping is likely ridiculously expensive outside of Canada (inside also). If anyone local is interested let me know and I can detail shipping charges. |
||||
| Calli Regular Member Joined: 20/10/2021 Location: GermanyPosts: 74 |
Hey. Greetings from the maker faire Hannover. Eben Upton playing a round Blocks.bas on the picomitevga. 😁 While talking about pico and stuff.  Sorry will edit the post . Does not work well on phone. Edited 2023-08-20 23:23 by Calli |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 3802 |
Lovely! Thanks for posting. John |
||||
| atmega8 Guru Joined: 19/11/2013 Location: GermanyPosts: 722 |
Calli is in love   |
||||
| Calli Regular Member Joined: 20/10/2021 Location: GermanyPosts: 74 |
I took the photo. The other guy is my colleague Akos who just did a long interview with Eben. 😁 Carsten. |
||||
| Calli Regular Member Joined: 20/10/2021 Location: GermanyPosts: 74 |
... double post ... Edited 2023-08-21 07:27 by Calli |
||||
| Page 7 of 7 |
|||||
 Print this page |
