 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : H7 is most compatible to......
  Page 2 of 2 |
|||||
| Author | Message | ||||
| PhenixRising Guru  Joined: 07/11/2023 Location: United KingdomPosts: 857 |
Or a STM32H743 from Aliexpress Link to STM32H743 Tip: When you have a long link, cut it down, up to the "?" https://www.amazon.com/-/de/dp/B09GCD3WVD/ref=sr_1_1?.........etc https://www.amazon.com/-/de/dp/B09GCD3WVD/ref=sr_1_1 This is all you need (most of the time) |
||||
| Wolfgang Newbie  Joined: 03/11/2021 Location: GermanyPosts: 15 |
Thank you all very much, you have saved me, I almost got this board. I will now order the Mouser board after all. It's looks easier for me to order from Mouser. Wolfgang |
||||
| PhenixRising Guru Joined: 07/11/2023 Location: United KingdomPosts: 857 |
Great to have another ARMmite H7 user...it's very nice  At some point, I intend to combine this with the Pico-2. Soooo many applications for this combination  |
||||
| Wolfgang Newbie Joined: 03/11/2021 Location: GermanyPosts: 15 |
Hello Peter, I found a demo video of yours on youtube in which tiger images (sprites?) are moved back and forth on an SSD1963 display with the help of a Nucleo-board!! An info informs that the corresponding program can be found on Backshed-Forum, but where? Although it's been a while, is this program still available? And if so, could you send me a link to this program with the pins used on that Nucleo-board,(may be a schematic?) so that it's easier to get started using examples. Many Thanks in advance Wolfgang |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 3800 |
It may be the attached. 2020-05-16_215840_tigerside800.zip John |
||||
| Wolfgang Newbie Joined: 03/11/2021 Location: GermanyPosts: 15 |
@JohnS it seems to be only the tiger picture. In the meantime, I have found, via search mode, something where Peter has described the connections to the Nucleos board. I will continue to work on this. Thk Wolfgang |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 3800 |
The file name shows the date so around/before then is probably when the related information was posted. John |
||||
| Wolfgang Newbie Joined: 03/11/2021 Location: GermanyPosts: 15 |
@JohnS many thanks, I found this one up to now: Version 5.04.09 2018-06-15_062752_Armmite.zip but I will continue to search with your new date. Wolfgang |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 3800 |
If for the STM32H743 (& 753) I think there are much newer versions (but they may be for the CMM2 rather than the Nucleo). I think Gerry (disco4now) will have the best ideas / version - try a PM to him. John |
||||
| PhenixRising Guru Joined: 07/11/2023 Location: United KingdomPosts: 857 |
I've lost track....are we looking for a program or the latest firmware? H7 Firmware |
||||
disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 896 |
See the H7 pages on FotS These will lead you to latest firmware,manuals and helpful mapping of nucleo connector pins to STM32H743 pins. The manual details the connections for the SSD1963. Latest F4 Latest H7 |
||||
| Wolfgang Newbie Joined: 03/11/2021 Location: GermanyPosts: 15 |
@disco4now, many thanks, the Link was very helpful. Wolfgang |
||||
| Page 2 of 2 |
|||||
 Print this page |
