Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : Is everyone else tidy? What does your workspace look lie?
Page 1 of 3 | |||||
Author | Message | ||||
matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9131 |
I was perplexed to see new member JesseW's tidy workspace. This is my work area ( as Tom could probably predict from my code ) What does yours look like? |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6804 |
I'm not sure what "tidy" means. I have "stuff" distributed in various places, with the majority being in the shed. That has very little workspace though and is mainly used for mechanical stuff. I have various boxes of components in the other room on some racking and some partially buried close to where I sit in the living room. Most of the resistors are stored in their bags in a business card folder and two plastic boxes that cakes came in. My "work area" is just a little bigger than the bit of table that's left clear when I move the keyboard out of the way! Test gear is balanced wherever it will fit at the time. :) I sometimes *dream* of having a "proper" work area ... Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
Hi lads, I think TIDY is a 4 letter word, I have a plethora of stuff piled on top of stuff that is piled on even more stuff, including on the floor in a very hap hazard manner. I have many half finished projects, somewhere, on my bench. Strangely I know where most stuff is. I have tried to tidy (sorry for swearing) the room up but I always get distracted when it’s starting to look good and there the tidying stops. I have a small shed also packed to the rafters with stuff, and a lot of stuff in the roof above my garage. I know part of this disease is the fact I hate throwing stuff away. I have several dead laptops, because I may need a mosfet or other part off one of them some time in the next 60 years. I am a disgrace to the Virgo community. Both the work spaces above look very organised and neat compared to mine. I will wait to see other embarrassing spaces before I post pictures and open myself up to ridicule. Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
Quazee137 Guru Joined: 07/08/2016 Location: United StatesPosts: 573 |
My BIG MESS Kitchen table Main work space Left main Right main Corner of bed room a picture is worth a thousand words so here a few 100K Quazee137 |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3196 |
Mine looks spartan by comparison... Geoff Graham - http://geoffg.net |
||||
SimpleSafeName Guru Joined: 28/07/2019 Location: United StatesPosts: 319 |
Sorry, no pictures - mine's a crime against humanity. Mine looks like a bomb went off, and then vandals came around to make sure that the job was *really* done right. :) |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
Ahh, Quazee, I think I love you. Still a bit neater than mine. OK, AndrewG challenged me to post some pictures of my work space. Well here they are, No attempt made to make it look better or worse than it is. Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3151 |
A man after my own heart, Mick. I'm always impressed if I can see any clear worksurface. I've always said that my desk is the battleground between order and chaos, and even if it looks like chaos has the upper hand, order will result in the end. PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
bigmik Guru Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
Hey Lizby, Did you steal some stuff off of my desk? I dont feel so ashamed now, it appears that it is more common than not to thrive in a cluttered world. Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
NPHighview Senior Member Joined: 02/09/2020 Location: United StatesPosts: 200 |
Here's mine... with extra (i.e. beyond the MMBasic realm) stuff for programming ATTiny85s etc. My wife would say that here's clear evidence of my OCD :-) Live in the Future. It's Just Starting Now! |
||||
barewires Newbie Joined: 13/04/2015 Location: United KingdomPosts: 30 |
It's all fun and games until your wife and her boyfriend have other plans for your workspace :) |
||||
Hawk Senior Member Joined: 15/07/2021 Location: AustraliaPosts: 141 |
Thank you to those of you who are tidy enough (or brave enough) to post your photos. I have a new space setup in the house which my wife has affectionalty named my "Nerd Nook" which is currently in not too bad a shape...it hasn't been in existance that long yet. My shed is an absolute nightmare, and I'm sure that if I posted photos of it you would probably have me signed up to "Hoarders Anonymous". As others have mentioned, I have too many projects on the go, and I'm not prepared to let any of them go, and also too many interests. Retirement is just not coming fast enouh for me. As for tidying, I get it partially tidied and then never finish it to any level of satisfaction before I'm back into projects. I'm seriously concerned that it's turning into a significant fire hazard. Hawk |
||||
paceman Guru Joined: 07/10/2011 Location: AustraliaPosts: 1329 |
Hmmm...OK time for me to come clean, but honestly looking at some of you I've decided my mess is modest. My wife does not agree and I'm often threatened with an arbitrary (while I'm not there) cleanup! Nooo... Mick, I reckon you win and Peter you get the Spock award (most purposeful - note the blue cloth for wiping sweat off the brow)! Geoff would have to be Luc Picard - even looks like him a bit :) Not sure what happened to the colours - I rotated it with Gimp. The other big cupboard is chocka, as are the two filing cabinets. The biggest problem I reckon is cables, they take up so much room but you never have the one you want if you get rid of any. I'd love a couple of nice shelves like some of you professionals have but I've been threatened with divorce if I try! Greg |
||||
OA47 Guru Joined: 11/04/2012 Location: AustraliaPosts: 926 |
I like to keep these pictures to show that the workshop can be nearly tidy. 0A47 |
||||
thwill Guru Joined: 16/09/2019 Location: United KingdomPosts: 4047 |
Some times limited space can be a blessing, I have to keep it clean between sessions: The bench on the left is usually busier with a VGA monitor and PicoGAME VGA that are currently on my day-job desk: Best wishes, Tom Edited 2023-05-01 16:36 by thwill Game*Mite, CMM2 Welcome Tape, Creaky old text adventures |
||||
Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4253 |
Huh...? Tesla coil power supply ? PicomiteVGA PETSCII ROBOTS |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6804 |
For doing the EMP tests on the PicoMite. :) Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
stanleyella Guru Joined: 25/06/2022 Location: United KingdomPosts: 2129 |
corner of the living room |
||||
Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4253 |
My small shed... Too cold in winter, even with the electric heater.. so much of my MMBasic is performed at the kitchen table, laptop and pico... Volhout PicomiteVGA PETSCII ROBOTS |
||||
Plasmamac Guru Joined: 31/01/2019 Location: GermanyPosts: 554 |
My alternate Reality what a Mess Plasma |
||||
Page 1 of 3 |
Print this page |