Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 14:13 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Wanted : solar tracker thingo

Author Message
brucedownunder2
Guru

Joined: 14/09/2005
Location: Australia
Posts: 1548
Posted: 06:47am 11 Nov 2011
Copy link to clipboard 
Print this post

Ok, hi crew ...

I'm nearly ready for the solar tracker electronic movement thingo ..

So, If anybod out there has a good idea of a Cct , I'm interested --a bit of background ,,, I have a 'polar" tracker under construction -IE --3 way tracker - and I'm running a 12 wire multi pair cable out to the tracker for most of the controlling I might have to do . plus a pair of 16mmm square building wire main current carrying conductors -it's a 880 watt 4 panel array..


so, if anyone has an unused tracker gismo or a lead to a good Cct , please let me know .

Thanks

Bruce.
Bushboy
 
TexAcoon

Newbie

Joined: 14/11/2011
Location: United States
Posts: 8
Posted: 03:12am 14 Nov 2011
Copy link to clipboard 
Print this post

G'Day Bruce!

New to the forum .. Here is a link on building a cheap solar tracker ... I think it's really cool .. Check it out ..

Cheap Solar Tracker

I would add a MOP (motor operated potentiometer) at the end of the servo to supply voltage to a small dc motor with an "all threaded rod" to the array .. As the solar tractor detects movement the servo will operate the dc motor to move your array .. It would take a little tweaking but once finished I think you'll have a really cool automatic tracker that doesn't cost a bunch ..


Here is another site to checkout ... Gives parts list for single axis tracking with a dark sensor that allows the array to swing back to the east after dark.
Phoenix Navigation

YouTube Video of operation

Doug
Cortland, Nebraska
Edited by TexAcoon 2011-11-15
 
brucedownunder2
Guru

Joined: 14/09/2005
Location: Australia
Posts: 1548
Posted: 01:45am 15 Nov 2011
Copy link to clipboard 
Print this post

Thanks Tex -or Dougie....lol

u gave me some good stuff to research -- thanks

I'll keep u posted how I go

Bruce
Bushboy
 
TexAcoon

Newbie

Joined: 14/11/2011
Location: United States
Posts: 8
Posted: 02:23am 15 Nov 2011
Copy link to clipboard 
Print this post

Excellent! ... Good luck on your project ..

Tex or Doug is good enough for me ...

I'm as smooth as silk just to blend in with the crowd ..

Doug
Cortland, NebraskaEdited by TexAcoon 2011-11-16
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024