Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 22:34 21 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : Inductors

Author Message
Haxby

Guru

Joined: 07/07/2008
Location: Australia
Posts: 423
Posted: 10:59am 20 Sep 2024
Copy link to clipboard 
Print this post

This is Roger's photo of a 4mH inductor from a 3kw aerosharp.

If I'm after a 2mH inductor, with double the current rating, would it be ok to connect the 4 wires in parallel?

And if so, I imagine I would connect white and red together and blue and black together.

Is that right?
 
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1679
Posted: 09:11pm 20 Sep 2024
Copy link to clipboard 
Print this post

I don't know what's in that choke or how it's wound.

But in general yes, given two inductors of the same value, paralleling the inductors will halve the inductance and give you a higher current capability.
It's all too hard.
Mike.
 
Revlac

Guru

Joined: 31/12/2016
Location: Australia
Posts: 1020
Posted: 10:15pm 20 Sep 2024
Copy link to clipboard 
Print this post

Looks the same as the 3rd one. The wire on that Big choke is 3 mm diameter.
Picture to see how its wound.

Cheers Aaron
Off The Grid
 
Haxby

Guru

Joined: 07/07/2008
Location: Australia
Posts: 423
Posted: 06:06am 21 Sep 2024
Copy link to clipboard 
Print this post

Ok I think I have to connect red and blue together and white and black together as the two coils are wound in different directions around the core.
 
Haxby

Guru

Joined: 07/07/2008
Location: Australia
Posts: 423
Posted: 07:15am 21 Sep 2024
Copy link to clipboard 
Print this post

Nope I think I was right the first time. So confusing  
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024