Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 15:45 23 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Windmills : air-lift pump thingy

Author Message
AllanS
Regular Member

Joined: 05/06/2006
Location:
Posts: 67
Posted: 04:09am 13 Sep 2006
Copy link to clipboard 
Print this post

Dwyer mentioned air-lift pumps. I've been thinking of using these as a way of squeezing some energy out of low grade heat.

As the compressed air and water rises up the pump pipe, the bubbles expand, lifting the water. But what if it was hot water, heated by cheap solar panels? This would give you maybe 20% extra expansion, lifting the water even higher. Then run this water down a pipe thru a pelton wheel. This wheel not only makes the compressed air to drive the lift-pump, but also makes a bit of electricity.

I don't know if inefficiencies would kill this device (do air-lift pumps give much bang for the buck?) but it's a neat idea, nonetheless.
 
RossW
Guru

Joined: 25/02/2006
Location: Australia
Posts: 495
Posted: 08:54am 13 Sep 2006
Copy link to clipboard 
Print this post

  AllanS said   Dwyer mentioned air-lift pumps. I've been thinking of using these as a way of squeezing some energy out of low grade heat.

As the compressed air and water rises up the pump pipe, the bubbles expand, lifting the water. But what if it was hot water, heated by cheap solar panels? This would give you maybe 20% extra expansion, lifting the water even higher. Then run this water down a pipe thru a pelton wheel. This wheel not only makes the compressed air to drive the lift-pump, but also makes a bit of electricity.

I don't know if inefficiencies would kill this device (do air-lift pumps give much bang for the buck?) but it's a neat idea, nonetheless.


Are you saying "over-unity" systems? I hope not :)

If the pelton wheel is making the compressed air to lift the water to drive the wheel.... well, it just ain't gunna work unless something gives more energy out than it uses!
 
AllanS
Regular Member

Joined: 05/06/2006
Location:
Posts: 67
Posted: 09:13am 13 Sep 2006
Copy link to clipboard 
Print this post

Hi Ross,

No over-unity dreaming here. The isothermal expansion of the gas (taking heat out of the water) does useful work, lifting the water higher than by the expansion of the compressed air alone. But how much higher, that's the question. High enough to compensate for the lift-pumps inefficiency? I somehow doubt it.

Here's a natural lift-pump that makes fascinating reading.Edited by AllanS 2006-09-14
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024