|
Forum Index : Windmills : KD 805 about the VIRYA-3.5B3 available
| Author | Message | ||||
| Adriaan Kragten Newbie Joined: 14/10/2015 Location: NetherlandsPosts: 29 |
Report KD 805 can be copied for free from my website: www.kdwindturbines.nl at the menu KD-reports. The title of this report is: “Calculations executed for the 3-bladed rotor of the VIRYA-3.5B3 windmill (lambda design = 6, wooden blades, Gö 711 airfoil) with the hinged side vane safety system using the generator of Hefei Top Grand model TGET320-1KW-350R for 24 V battery charging”. KD 805 replaces KD 705 about the VIRYA-3B3 using the same generator. |
||||
| Adriaan Kragten Newbie Joined: 14/10/2015 Location: NetherlandsPosts: 29 |
At 16-6-2026 a new chapter 7 has been added to KD 805. The title of this chapter is: "Drawings of the VIRYA-3.5B3". The drawings of the 2-bladed VIRYA-3.5 have been modified such that now there is a detailed drawing of all components of the VIRYA-3.5B3. |
||||
| Adriaan Kragten Newbie Joined: 14/10/2015 Location: NetherlandsPosts: 29 |
At 17-6-2026 a separate folder was made about the VIRYA-3.5B3. This folder can be found on my website at the menu VIRYA-folders. At 18-6-2026 photos have been made of the drawings of the VIRYA-3.5B3. These photos are added to chapter 7. The parts lists are also added to chapter 7. Edited 2026-06-18 18:32 by Adriaan Kragten |
||||
Revlac![]() Guru Joined: 31/12/2016 Location: AustraliaPosts: 1277 |
Hi Adriaan, Can you put a link to your web page in your signature profile? It might be easier to navigate to the website that way. ![]() Cheers Aaron Off The Grid |
||||
| Adriaan Kragten Newbie Joined: 14/10/2015 Location: NetherlandsPosts: 29 |
At 21-6-2026 a manual was made for the VIRYA-3.5B3. This manual is given at my website: www.kdwindturbines.nl at the bottom of the menu KD-reports. |
||||
| Adriaan Kragten Newbie Joined: 14/10/2015 Location: NetherlandsPosts: 29 |
I went to my settings but there is no place where I can mention my website. There is only a place where I can mention my e-mail address and that's given. Therefore my website is mentioned in my first and last post. |
||||
| phil99 Guru Joined: 11/02/2018 Location: AustraliaPosts: 3293 |
Perhaps manually adding the [TAGS] will work. Eg. [url=https://www.kdwindturbines.nl]Adriaan Kragten[/url] Replace the lowercase "url" with uppercase "URL" at the start and finish so the site will recognize the [TAG=...] and [/TAG] It should then appear like this in your signature:- Adriaan Kragten Edited 2026-06-21 22:06 by phil99 |
||||
| The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2026 |