 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : PCB Manufacturing : AutoTraxDEX website down
| Author | Message | ||||
TassyJim Guru  Joined: 07/08/2011 Location: AustraliaPosts: 6089 |
It looks like the AutoTRAX DEX website down. Can't access the main page or the forum.  I think he is changing the website but surely there's a redirect in place. Anyone have a working address? Jim VK7JH MMedit MMBasic Help |
||||
disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 896 |
Seems to be at https://active3d.com/ but forum link is still the old one and times out. Whats new at that site says latest version is 2018/905 Regards Gerry Latest F4 Latest H7 |
||||
| TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6089 |
Thanks, I wasn't sure about the new address. Last time he shifted, a lot of users got lost. I'm running 2018.904 and it can't find the new site to do an autoupdate. I'll do a manual update and see if it can find the new site. Jim Edit: With V905, It can find 'whats new' but no luck with 'check for new version' so I expect that auto-update will not work either.  VK7JH MMedit MMBasic Help |
||||
| disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 896 |
2018/905 can find whats new, but can't tell you that you have the latest version, so only partially changed I would say. Latest F4 Latest H7 |
||||
Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1057 |
I just downloaded 2018.905 ok. Something is working. ChopperP |
||||
plover Guru Joined: 18/04/2013 Location: AustraliaPosts: 302 |
All seems well again, just had a quick look on forum. |
||||
 Print this page |
