| Author |
Message |
JorgeOsv
Newbie
Joined: 02/12/2023
Location: BoliviaPosts: 3 |
| Posted: 10:09am 10 Dec 2023 |
 Copy link to clipboard |
 Print this post |
|
Good morning, I'm new to the forum, I'm returning to the basics of my youth. Picomite is great. What I have not been able to make work is the ST7789_135 screen of the LILYGO T-Display RP2040 which has a configuration mosi=GP3, sclk=GP2, cs=GP5, dc=GP1, rst=GP0, bl=GP4. Any help or suggestion is valid since it is a very economical board. THANK YOU |
| |
matherp
Guru
Joined: 11/12/2012
Location: United KingdomPosts: 9119 |
| Posted: 10:17am 10 Dec 2023 |
Copy link to clipboard |
Print this post |
|
Option system spi gp2,gp3,gp16
option lcdpanel ST7789_135,L,GP1,gp0,gp5,gp4 |
| |
JorgeOsv
Newbie
Joined: 02/12/2023
Location: BoliviaPosts: 3 |
| Posted: 10:45am 10 Dec 2023 |
Copy link to clipboard |
Print this post |
|
OPTION SYSTEM SPI GP2,GP3,GP16
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION LCDPANEL ST7789_135, LANDSCAPE,GP1,GP0,GP5,GP4
Thanks for the quick reply. This is how I have it configured without any results, what could I be missing? |
| |
matherp
Guru
Joined: 11/12/2012
Location: United KingdomPosts: 9119 |
| Posted: 10:52am 10 Dec 2023 |
Copy link to clipboard |
Print this post |
|
Try BACKLIGHT 50. Sometimes they invert the backlight signal. If you get a picture with that set the default backlight to 0 |
| |
JanVolk
Senior Member
Joined: 28/01/2023
Location: NetherlandsPosts: 144 |
| Posted: 09:08pm 10 Dec 2023 |
Copy link to clipboard |
Print this post |
|
Possibly there are multiple versions of the LILYGO T-Display RP2040 in circulation?
The one I own is the LILYGO T-Display RP2040 2021-7-22 V1.1 with ST7789V 240x135 display and it works with the following connections:
GP03=MOSI
GP02=SCLK
GP05=CS
GP01=DC
GP06=RST
GP04=BL
GP22=PWR
OPTION SYSTEM SPI GP2,GP3,GP0 ' CLK,MOSI,MISO
OPTION LCD PANEL ST7789_135, LANDSCAPE,GP1,GP6,GP5,GP4
Program:
SETPIN GP22, DOUT
PIN(GP22) = 1 ' POWER EN = 1
BACKLIGHT = 10 ' BACKLIGHT 0-100 0 = OFF
TEXT 0.0, "Hello World"
Jan. |
| |
JorgeOsv
Newbie
Joined: 02/12/2023
Location: BoliviaPosts: 3 |
| Posted: 09:38pm 10 Dec 2023 |
Copy link to clipboard |
Print this post |
|
Thank you very much Jan, it has been a great help, now it works and I can continue with my project |
| |
Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.