TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 06:54 06 Aug 2026	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : CMM2: Boards available in Australia

Author

Message

rrroonn

Newbie

Joined: 08/02/2026
Location: Australia
Posts: 13

Posted: 03:46am 22 Jul 2026

Copy link to clipboard

Print this post

Hi,

Hopefully not frowned upon

...

I was going to make up some CMM2 computers for the grand-kids but have decided to go another way. I had 5 boards made up by JLCPCB and have soldered the remaining components for the first board to make sure they work. I have loaded 6.beta.13 firmware and tested - everything seems ok to me. "final-flight" was my test run;-)

I dont have enough bits like switches, connectors, for all 5 boards, though I have most bits. I am happy to solder up at least another board but can provide the remainder as they come from JLCPCB or I can get some more bits to complete the boards if someone is desperate for a complete board.

I also have two cases without cutouts. Personally, I was going to 3D print cases for them.

I also have a Gen 1 CMM2 that I bought from ebay (it is complete).

Not trying to make a profit, just cover some of the costs. When they are gone, they are gone.

PM for details if interested.

thanks,

Ron

Too old for bs

Print this page

To reply to this topic, you need to log in.