Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 20:16 03 Jan 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : 2.2" TFT

Author Message
palcal

Guru

Joined: 12/10/2011
Location: Australia
Posts: 1884
Posted: 07:27am 30 Dec 2024
Copy link to clipboard 
Print this post

I was looking for a 2.2" display and bought one of these  Display
On a MM backpack it sits a bit offset but all I get is the backlight.
Can any one point me to a 2.2" display that works.
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all"
 
phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 2200
Posted: 07:52am 30 Dec 2024
Copy link to clipboard 
Print this post

It isn't clear what chip is on the display.
  Quote  ILI9341 51/AVR/STM32/ARM/PIC L2KO
All I can suggest is look for one that only shows ILI9341.

The photo in the add shows a regulator U1  with a bypass jumper J1.
Check that you have 5V in and 3.3V out if J1 is open. If your supply is 3.3v bridge J1.
 
disco4now

Guru

Joined: 18/12/2014
Location: Australia
Posts: 923
Posted: 07:52am 30 Dec 2024
Copy link to clipboard 
Print this post

If you are powering VCC at 3.3V you should bridge J1 to bypass the regulator. It appears to be one that should  work. Did you try GUI TEST LCDPANEL to verify it does not have just have colours inverted.
P.S.
What he said.
Edited 2024-12-30 17:53 by disco4now
Latest F4 Latest H7
 
palcal

Guru

Joined: 12/10/2011
Location: Australia
Posts: 1884
Posted: 08:21am 30 Dec 2024
Copy link to clipboard 
Print this post

Running at 5v. I took the 2.4" screen off a working project and when I connected this one all I get is a back light. Didn't do a GUI test touch, I'll do it tomorrow.
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all"
 
disco4now

Guru

Joined: 18/12/2014
Location: Australia
Posts: 923
Posted: 09:19am 30 Dec 2024
Copy link to clipboard 
Print this post

That is GUI TEST LCDPANEL , there is no touch on those 2.2" screens.
Latest F4 Latest H7
 
palcal

Guru

Joined: 12/10/2011
Location: Australia
Posts: 1884
Posted: 08:38pm 30 Dec 2024
Copy link to clipboard 
Print this post

Yes I meant LCDPANEL, I know it doesn't have touch.
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all"
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2025