Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 04:00 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : PicoMite with XP?

Author Message
PhenixRising
Guru

Joined: 07/11/2023
Location: United Kingdom
Posts: 857
Posted: 10:02am 23 Oct 2024
Copy link to clipboard 
Print this post

I have downloaded MMEdit (portable) for my XP machine but I have never used the Pico on XP. Device manager just shows "Pico ?"
 
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2114
Posted: 03:38pm 23 Oct 2024
Copy link to clipboard 
Print this post

"Is Windows XP still usable in 2024?
Yes, in fact, they are. According to StatCounter, as of March 2024, 0.39% of desktops are still running Windows XP. Let's do a little math. Microsoft claims there are 1.4 billion Windows PCs in the world, so that means we still have not quite 5.5 million XP computers up and running somewhere"
 
PhenixRising
Guru

Joined: 07/11/2023
Location: United Kingdom
Posts: 857
Posted: 04:08pm 23 Oct 2024
Copy link to clipboard 
Print this post

  stanleyella said  "Is Windows XP still usable in 2024?
Yes, in fact, they are. According to StatCounter, as of March 2024, 0.39% of desktops are still running Windows XP. Let's do a little math. Microsoft claims there are 1.4 billion Windows PCs in the world, so that means we still have not quite 5.5 million XP computers up and running somewhere"


I use a Panasonic Toughbook CF18 on the plant-floor and it has been rock-solid for years. Very low-powered and I didn't wanna risk trying to install W7.
 
Volhout
Guru

Joined: 05/03/2018
Location: Netherlands
Posts: 4222
Posted: 04:11pm 23 Oct 2024
Copy link to clipboard 
Print this post

Hi Phenix,

I see you have a new job, building pico CNC controllers.
Great action to prove they where wrong.

Volhout
PicomiteVGA PETSCII ROBOTS
 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6094
Posted: 07:54pm 23 Oct 2024
Copy link to clipboard 
Print this post

You have to install drivers for the pico USB
https://forums.raspberrypi.com/viewtopic.php?t=300053

or
use a USB-TTL that has XP drivers and configure a serial console port on the pico.
You won't be able to update MMMBasic firmware but your code updates are OK through the console oprt.

Jim
VK7JH
MMedit   MMBasic Help
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9305
Posted: 02:11am 24 Oct 2024
Copy link to clipboard 
Print this post

When I had my low-power FM radio station, I used XP to play all the music.
It was perfect for that, and rock-solid.
It was standalone - never connected to the network or the internet, but as a standalone music player just running that software and nothing else, it was pretty much bulletproof.  Ran 24/7/365 for the several years I had that radio station on-air, and never gave any trouble.  So, still useful for certain things!  
Smoke makes things work. When the smoke gets out, it stops!
 
robert.rozee
Guru

Joined: 31/12/2012
Location: New Zealand
Posts: 2350
Posted: 11:34am 24 Oct 2024
Copy link to clipboard 
Print this post

to answer Michael's initial question, download Zadig XP version 2.2 from here:
https://zadig.akeo.ie/downloads/

and then follow these slides:












note in the second slide to select USB Serial (CDC) in the dropdown.


cheers,
rob   :-)
Edited 2024-10-25 12:49 by robert.rozee
 
PhenixRising
Guru

Joined: 07/11/2023
Location: United Kingdom
Posts: 857
Posted: 01:44pm 24 Oct 2024
Copy link to clipboard 
Print this post

OMG....that must've taken all of two minutes  
Many, many thanks, Rob

 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024