 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : SSD1963 SPI LCD or not
| Author | Message | ||||
Bryan1 Guru  Joined: 22/02/2006 Location: AustraliaPosts: 1344 |
G'day Guy's, Well I bought this and it clearly stated SPI or do I have it wrong that these size displays do need a 16 bit connection.  Anyway got 5 standard picos on the way as the zero doesn't have all the pins to run this. Regards Bryan |
||||
disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 896 |
The SPI would be referring to the touch interface. They can be run with 8 bit parallel, the Picomite manual gives the wiring. The pins for D0-D7 are fixed, but you can be flexible with RD,WR,RS and Reset pins Latest F4 Latest H7 |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6779 |
More AE inaccuracy, I'm afraid. :) They are a very nice display though, even if you need a lot of GPIO pins. Faster than SPI displays by quite a bit. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
 Print this page |
