 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : picomite custom function to control RTS and CTS possible?
  Page 2 of 2 |
|||||
| Author | Message | ||||
bigmik Guru  Joined: 20/06/2011 Location: AustraliaPosts: 2914 |
That sounds great Peter, Will wireless keyboard dongles be compatible with the new firmware and will this be ported to the PicoMite as well as PicoVGA? Although it won’t have the same versatility as the VGA one would have. Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 828 |
Is that really necessary? Unfortunately, there are some designs where the button is not or only very poorly accessible... Frank |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6787 |
If he needs a command name slot for KEYDOWN than that may be a reason to remove it. All the available slots are currently used. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6098 |
The alternative is to connect to the pico at 1200 baud. That puts it into update mode. Jim VK7JH MMedit MMBasic Help |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 828 |
That's cool!!!  Where is this documented? I couldn't find it in the manual... Frank |
||||
phil99 Guru Joined: 11/02/2018 Location: AustraliaPosts: 2135 |
Terminal Emulator chapter. Near the bottom of page 5 Of the PicoMite manual. |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 828 |
THANKS! Frank |
||||
| lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3150 |
How about an OPTION UPDATE FIRMWARE? (Not really an option, but an overloading of the OPTION token for one-time use.) PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9115 |
It's nothing to do with command slots. It uses a function that is only enabled when a USB console device is enabled in the cmake file. |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6787 |
That makes sense. You can't download an update file from a keyboard. :) I assume the button or connecting at 1200bd will work via the serial console on GP8 & GP9. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6098 |
I doubt it. Once you are in firmware update mode, you are at the mercy of the pico bootloader. Jim VK7JH MMedit MMBasic Help |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 6787 |
I did suspect that once I thought about it more, as the Boot button directly triggers the flash, not the RP2040. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| Page 2 of 2 |
|||||
 Print this page |
