 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : WEB TRANSMIT CODE a%, XXX
| Author | Message | ||||
| carlschneider Senior Member  Joined: 04/08/2023 Location: South AfricaPosts: 158 |
Hi there I note that the WEB TRANSMIT CODE a%, nnn command does not provide an option for the plain text description nor is there a canned one in the command. When using WEB TRANSMIT CODE a%, 404 the transmitted header is HTTP1.0 404 \r\n\r\n Wireshark captured packet:- Packet # Time Source Destination Protocol Length Info 753 98.010096. XXX.XXX.XXX.XXX XXX.XXX.XXX.YYY HTTP 54 HTTP/1.0 404 Hypertext Transfer Protocol HTTP/1.0 404\r\n \r\n [HTTP response 1/1] [Time since request: 0.240804000 seconds] [Request in frame: 694] [Request URI: http://xxx.xxx.xxx.yyy/] This tends to leave the browser blank faced :) (Safari and Chrome) When using OPTION TCP SERVER PORT 80 Consider putting the following files on the A: drive to avoid browser associated 404 errors loading the web server. favicon.ico apple-touch-icon-precomposed.png apple-touch-icon.png These can all be zero sized. It just reduces the server overhead a little bit in my opinion. Link here for more in depth information on the apple flavour of favicon https://mathiasbynens.be/notes/touch-icons A more informative File Not Found html response can be compiled and sent with the WEB TRANSMIT PAGE, with a slightly increased server overhead, especially if one is coding using these commands on the WebMite. Hope this helps. Cheers Carl Retirement is tough on Hobbies without a day job |
||||
 Print this page |
