 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : What is a webmite
| Author | Message | ||||
Rickard5 Guru  Joined: 31/03/2022 Location: United StatesPosts: 463 |
Hello Everybody I've been off the reservation for the 6-8 months so I think I missed something, so here goes my first of many stupid questions WhT IS A WEBMITE? I may be Vulgar, but , while I'm poor, I'm Industrious, Honest, and trustworthy! I Know my Place |
||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 6100 |
https://geoffg.net/webmite.html You can download the manual (and firmware) from there. Look towards the bottom of the page. VK7JH MMedit MMBasic Help |
||||
stanleyella Guru Joined: 25/06/2022 Location: United KingdomPosts: 2129 |
It's rocket science like programming pio :) actually it is. :( |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4247 |
Html is not like basic, but it is not difficult. Files tend to grow big, Lots of documentation online. Just follow the training course on this forum, and you have a nice start. Honestly, PIO is much more complex. A mistake is hard to debug. Html can be debugged in your browser. Volhout PicomiteVGA PETSCII ROBOTS |
||||
| JanVolk Senior Member  Joined: 28/01/2023 Location: NetherlandsPosts: 145 |
And if you still can't figure it out or get stuck? No problem, the Raspberry Pi Pico W also works with the firmware of the PicoMite or PicoMiteVGA. (Not yet tested with PicoMiteVGA) Only the LED on the PCB will then not work because it is controlled from the WiFi module. WL = WIFI Module WL_GPIO0 = LED PCB WL_GPIO1 = PS/SYNC 3V3 POWER WL_GPIO2 = 1/2 VBUS WL_ON = GPIO23 WL_D = GPIO24 WL_CS = GPIO25 WL_CLK = GPIO29 Jan |
||||
 Print this page |
