Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 12:21 24 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : EV's : Direct battery access

Author Message
basking_in_the_sun2000
Newbie

Joined: 20/02/2020
Location: United Kingdom
Posts: 1
Posted: 09:42pm 01 Mar 2020
Copy link to clipboard 
Print this post

I watched a video from weber university and noticed that the fast dc charging ports seems to be directly connected to the battery (with a contactor between). This got me thinking that maybe it could be used as a backup battery for a hybrid inverter.

Don't have enough information, but seems that the voltage is compatible with inverters using a high voltage LG rheus battery (300–400 V). Was thinking it would only need blocking diodes to prevent the battery from charging, since a charge controller would be a more involved project. Not only providing the correct charging profile, but maybe also needing to emulate the bms of the battery.  A 25A 600V diode shouldn't be hard to get.

Not sure if the inverter expects the bms to be active to use the battery? On mine the battery seems to be in parallel with the output from the pv panels.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024