Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 18:10 23 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Price Watch : Big chokes 31 bucks

Author Message
BenandAmber
Guru

Joined: 16/02/2019
Location: United States
Posts: 961
Posted: 02:02am 06 May 2019
Copy link to clipboard 
Print this post




This is not my ad

I bought some capacitors off this guy

now I'm buying a couple of these to make a bigger choke for my 10000 watt China board and the other one for the power Jack

This guy bought out a inverter company that went under so all these parts were originally bought for inverters

Oh yeah and since I bought two of them he sold them to me a little bit cheaper 41 bucks for two of them


I'm not sure if these are ferrite or not they're kind of heavy

Not laminated definitely ferrite








He has a lot of other miscellaneous inverter Parts also that he sells on eBayEdited by BenandAmber 2019-05-17
be warned i am good parrot but Dumber than a box of rocks
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 06:25am 06 Mar 2020
Copy link to clipboard 
Print this post

There is enough information there to reverse engineer that.

Green/yellow core looks like Micrometals powdered iron mix 40.

Part number T520-40D which is the largest size available. 5.2" OD, 3.08" ID, height 1.6"

Published Al value 240nH for one turn.  Fifty one turns 51 x 51 x .24uH = 624uH which is pretty close to what you measured.
It very likely has 50 turns.

Looking at the magnetization curve, it has a very soft saturation characteristic.
At 100 Orsteads about 40% of initial permeability.
That works out to 40% of 624uH = 250uH at 52 amps.

At 200 Orsteads about 22% of 624uH = 55uH at 104 amps.

All very nice, and pretty fair value for $31 US dollars.
That's about roughly $50 Aussie bux.

Nice find Ben.
Cheers,  Tony.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024