TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 04:41 25 Nov 2024	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Other Stuff : Which rewiring option for pedal power?

Author

Message

nzTim
Newbie

Joined: 13/11/2013
Location: New Zealand
Posts: 5

Posted: 11:02am 13 Nov 2013

Copy link to clipboard

Print this post

Im making a pedal power bike to charge a 12v AGM battery through a controller.
Does anybody have any thoughts on the best rewiring option for the smart drive?
2X7C
7X2C
7X2Cdelta
or maybe
7Phase 3X2C

Any suggestions would be most helpful

Many Thanks
Tim

Gizmo

Admin Group

Joined: 05/06/2004
Location: Australia
Posts: 5078

Posted: 01:02pm 13 Nov 2013

Copy link to clipboard

Print this post

How fast do you want to pedal? Direct drive, or will you use a chain and sprocket drive where you can try different ratio's.

Also, which stator do you have, a 60, 80 or 100?

Have you seen the pedal power page http://www.thebackshed.com/Windmill/articles/PedalPower.asp

Glenn

The best time to plant a tree was twenty years ago, the second best time is right now.
JAQ

nzTim
Newbie

Joined: 13/11/2013
Location: New Zealand
Posts: 5

Posted: 01:11pm 15 Nov 2013

Copy link to clipboard

Print this post

Gizmo said How fast do you want to pedal? Direct drive, or will you use a chain and sprocket drive where you can try different ratio's.

Also, which stator do you have, a 60, 80 or 100?

Have you seen the pedal power page http://www.thebackshed.com/Windmill/articles/PedalPower.asp

Glenn

Hi Glen. I was going to aim for 80rpm but go through bike gears to spin the rotor faster. How fast - im not sure, ill have to experiment a bit Edited by Gizmo 2013-11-17

Print this page

To reply to this topic, you need to log in.