 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Solar : Control board for Hill pump
| Author | Message | ||||
| Over-engineered Newbie  Joined: 03/04/2012 Location: AustraliaPosts: 2 |
Hi All This is my first post, so I should do the polite thing and introduce my self. I am a broadcast tech, working on the national broadcast network (ABC/SBS) with various companies for the last 40 years, love timkering in a well setup shed in Central West of NSW. My most recient project is to install an evacuated tube solar hot water system on our home. The reason for the post is I an trying the obtain a schmeatics and possibly spare control boards for the Hill Solar HSC-01 combo pump and controller with a view to adding some protection as we have some VERY lively mains variations here. Appreciate any input Cheers |
||||
fillm Guru  Joined: 10/02/2007 Location: AustraliaPosts: 730 |
Welcome Over , If its AC Mains problems then why not go to DC . The Mod I did on a Electric hot water service to solar , I used all off the shelf DC controlls and Pump LINK HERE to the thread on what I did and I think all the details are there for the controlls and pump . There is a few options with the pump and controll, it can be direct driven from a small solar panel , or you could put a small battery and trickle charger ,the options go on and on I supose. Another good source for all solar stuff is F.X Larkin Link Here Hope all that helps in some way PhillM ...Oz Wind Engineering..Wind Turbine Kits 500W - 5000W ~ F&P Dual Kits ~ GOE222Blades- Voltage Control Parts ------- Tower kits |
||||
 Print this page |
