Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 09:35 25 Nov 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Solar : Cap doubler

Author Message
Thai
Newbie

Joined: 22/05/2018
Location: United States
Posts: 30
Posted: 04:34pm 28 May 2018
Copy link to clipboard 
Print this post

For a cap double, can I use different size uf and voltages. Then connect same together and the parallel them? If so what will be the guestamated
output
 
Warpspeed
Guru

Joined: 09/08/2007
Location: Australia
Posts: 4406
Posted: 11:09pm 30 May 2018
Copy link to clipboard 
Print this post

No way of knowing as you give us no actual information.
Cheers,  Tony.
 
zaphod

Regular Member

Joined: 03/06/2018
Location: United Kingdom
Posts: 93
Posted: 07:30am 04 Jun 2018
Copy link to clipboard 
Print this post

You should know that by adding capacitors in parallel the total capacitance is the sum of the parts, however each capacitors voltage rating must be adiquite for the application but not necessarily the same.

For example on a 12V bus you could have 100uF/25V and 220uF/63V the result would be 330uF/25V.
Cheers Roger
1Kwp DIY PV + Woodburner + Rainwater scavanger :)
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024