Guru
Joined: 09/09/2009
Location: AustraliaPosts: 2333
| Posted: 11:04am 14 Sep 2009 |
Nice work Vasi,
Your boards look very neat.
Have you tried using posi-resist pcb with UV light to expose the board with.
I have used both methods and much prefer the UV light method.
If you intend on doing more than one board the UV is far easies and quicker.
Then again, if it works for you than why change.
I found sign writers have large rolls of the glossy backed transfer/sticker paper just being discarded, after the vinal lettering has been cut and removed.
Just ask and you will get heaps for free.
It works well although much thicker than the A4 sticker backings.
Sometimes it just works