Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2284
| Posted: 08:24am 08 Aug 2026 |
I will give it a quick test in the morning before I take the board over to see Sam and I did find just taking the dongle out of the usb and re-inserting it back in got the mouse working.
Now on bootup it does show the mouse is connected so not sure what is going on anyway got Claude on my desktop now so it can have a look and see what is going on.
I do have to say this car club project is moving along at a rapid pace and it's starting to become a solid OS
on every software update and there was few everytime each board connected to wifi on boot then opening the wifi page saw they were both connected on the network. Doing a 1 letter edit and pressing save then update saw the changes on the other board straight away.Also I will test the other 3 boards and see if the USB problem is there or not, now I did get an email saying a couple of boards had some yellowing and I had to give the OK for them to ship so I will have a look with my microscope and see if anything is a miss.
Regards Bryan