Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2284
| Posted: 08:23am 05 Aug 2026 |
Well another good day's work on this project
got it setup now when the pico 3 starts the wifi connects then boots straight into club.py and setup a Export/Import page where the SD card is shown so files can imported and exported.Now clicking on ALL Members then Export takes 2 clicks and the ticker displays all the infomation then it makes a time stamped CSV file. There is a box where the IP of the other boards is put in then click send and it will show whether the file sent or failed.
On the second board opening Export/ Import then clicking refresh will show the file and a double click on Import then the file is inserted into the code.
Got Claude to make a 100 member list so we could test it all out and sure enough board 2 had that 100 member file where it showed on the member page. As we now have 100 with the listbox just poit the mouse click and move up and down the list.
Now where Claude is having fun NOT is with jpg images that are imported by a mobile phone. As the mobile will add a 20 digit number as the file name on the webpage is a box where the filename can be saved then click upload and a minute or 2 later the file comes up in the photo page.
He setup a full screen view where once the image is loaded it stays there for 5 seconds then reverts back to the photo page but the images are too grainy and it does need to be better.After tomorrows effort I will zip up club.py as honestly currently at 90KB a bit too big to put between
Regards Bryan